D-Link Dis-200G Series Cli Reference Manual page 145

DSCP-LIST
Default
CoS Value:
DSCP Value: 0-7
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
The DSCP to CoS map is used by a DSCP trust port to map a DSCP value to an internal CoS value.
Example
This example shows how to configure the DSCP to CoS map for mapping DSCP 12, 16, and 18 to CoS 1.
Switch# configure terminal
Switch(config)# mls qos map dscp-cos 12,16,18 to 1
Switch(config)#
28-3 mls qos scheduler
This command is used to configure the scheduling mechanism. Use the no form of this command to reset the
packet scheduling mechanism to the default.
mls qos scheduler {sp |wrr}
no mls qos scheduler
Parameters
sp
wrr
Default
The default queue scheduling algorithm is WRR.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
separated by commas (,) or hyphens (-) with no spaces or
hyphens before and after.
Specifies the range of DSCP values.
0 1 2
8-15 16-23
Specifies that all queues are in strict priority scheduling.
Specifies the queues in the frame count weighted round-robin
scheduling.
3 4 5
24-31 32-39 40-47
141
6 7
48-55 56-63