D-Link Dis-200G Series Cli Reference Manual page 137

PROFILE-NAME
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to add or delete a time range profile for the port shutdown schedule. When the schedule is
up, the specific port will be disabled.
Example
This example shows how to add a time range profile for the port shutdown schedule.
Switch# configure terminal
Switch(config)# interface Ethernet 1/0/1
Switch(config-if)# power-saving shutdown time-range day-time
Switch(config-if)#
26-7 show power-saving
This command is used to display the power saving configuration information.
show power-saving [link-detection] [dim-led] [port-shutdown] [hibernation] [eee]
Parameters
link-detection
dim-led
port-shutdown
hibernation
eee
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Specifies the name of the time range profile to be configured. The
maximum length is 32 characters.
(Optional) Specifies to display the link detection state.
(Optional) Specifies to display the dim LED state.
(Optional) Specifies to display the port shutdown state.
(Optional) Specifies to display the hibernation state.
(Optional) Specifies to display the EEE state.
133