D-Link Dis-200G Series Cli Reference Manual page 18

2-8 show version
This command is used to display the Switch's software version information.
show version
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays version information about the Switch.
Example
This example shows how to displays version information about the Switch.
Switch# show version
System MAC Address : 00-01-13-12-AB-00
Unit ID
------- ------------------ ---------------------
1
Switch#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
Module Name
DIS-200G H/W:A1
Bootloader:1.10.001
Runtime:1.10.001
Versions
14