D-Link Dis-200G Series Cli Reference Manual page 205

EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display ONVIF-based NVR and group information. The group ID is the group ID of
the IPCs that belong to the NVR group. NVRs and IPCs, managed by it, must have the same group ID.
Example
This example shows how to display ONVIF-based NVR information.
Switch# show surveillance vlan onvif-nvr interface Ethernet 1/0/1
Interface
IP Address
MAC Address : 00-01-02-03-04-08
IPC Number
Manufacturer : D-Link
Group
Description
Total Entries: 1
Switch#
This example shows how to display ONVIF-based NVR information associated with the group ID 'ipc-list'.
Switch# show surveillance vlan onvif- nvr interface Ethernet 1/0/1 ipc-list
Interface
-------------- ----------------- -------------------- -------- -----------------
1
1
Total Entries : 2
Switch#
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
: eth1/0/1
: 111.111.111.111
: 2
: Group 1
: D-Link-NVR
IP address
10.90.90.90
10.90.90.100
MAC address
00-01-02-03-04-05
00-01-02-03-04-06
201
Group Description
1 D-Link-IPC-1
1 D-Link-IPC-2