Recommended Lubricants - MacDon R113 Operator's Manual

Recommended Lubricants

Keep your machine operating at top efficiency by using only clean lubricants and by ensuring the following:
•
Use clean containers to handle all lubricants.
•
Store lubricants in an area protected from dust, moisture, and other contaminants.
IMPORTANT:
Do NOT overfill the cutterbar when adding lubricant. Overfilling could result in overheating and failure of cutterbar
components.
Lubricant Specification
SAE
Grease
Multipurpose
SAE 80W-90
Gear
SAE 85W-140
Lubricant
SAE 80W-140
Description
High temperature extreme
pressure (EP) performance with
1% maximum molybdenum
disulphide (NLGI Grade 2)
lithium base
High temperature extreme
pressure (EP) performance with
10% maximum molybdenum
disulphide (NLGI Grade 2)
lithium base
High thermal and oxidation
stability API service class GL-5
Gear lubricant API service
class GL-5
Fully synthetic oil API GL-5
minimum, SAE J2360 preferred
Use
As required unless
otherwise specified
Driveline slip-joints
Cutterbar 8 liters (8.5 qts [US])
Conditioner roll
0.7 liters (0.75 qts [US])
timing gearbox
Header drive 90-
1.85 liters
degree gearbox
(1.95 qts [US])
Capacities
—
—