Motor Type; Machine Data - BONFIGLIOLI ACTIVE CUBE 201 Operating Instructions Manual

9.2.3

Motor Type

The properties of the control functions and methods to be set vary depending on the
motor which is connected. Parameter
variants with the corresponding values. The verification of the entered rated values
and the guided commissioning are carried out on the basis of the parameterized
motor type. The selection of motor types varies according to the applications of the
different control methods. In operating instructions the functionality and operating
performance are described for 3-phase motors.
Motor Type 369
0 - Unknown
1 - Asynchronous
2 - Synchronous
3 - Reluctance
10 - Transformer
1)
No parameter identification is performed for setting Parameter
Operation Mode "10 - Transformer".
NOTICE
Query and setting of parameter values depends on the operation mode selected for
parameter
If the motor type is not entered correctly, the drive may be damaged.
When the motor type is specified, the machine data must be entered. This is described in the
following chapter. The data is queried in accordance with the table in this chapter.
9.2.4

Machine data

The machine data to be entered during the guided commissioning procedure are
indicated on the type plate or the data sheet of the motor. The factory settings of
the machine parameters are based on the nominal data of the frequency inverter
and the corresponding four-pole three-phase motor. The entered and calculated
machine data are checked for plausibility during the guided commissioning
procedure. The user should verify the factory-set rated data of the three-phase
motor.
U I
FIN, FIN,
No.
370 Rated Voltage
371 Rated Current
372 Rated Speed
374 Rated Cosinus Phi
375 Rated Frequency
376 Rated Mech. Power
Use the arrow keys to select the required parameter and edit the parameter value.
Use the ENT key to confirm the selected parameter and the parameter values
entered.
12/16
The motor is not a standard type.
Three-phase asynchronous motor, squirrel cage
Three-phase synchronous motor
Three-phase reluctance motor
1)
Transformer with three primary windings.
369.
Motor Type
P are rated values of the frequency inverter.
FIN
Parameter
Description
Operating Instructions ACU
369 offers a range of motor
Motor Type
Function
Setting
Min. Max.
0.17U 2U
FIN FIN
0.01I 10oI
FIN
-1
96 min 60 000 min
0.01 1.00
10.00 Hz 599.00 Hz
0.01P 10P
FIN FIN
369
to
Motor Type
Factory
setting
U
FIN
I
FIN FIN
-1
n
N
cos()
N
50.00
P
FIN
103