BONFIGLIOLI ACTIVE CUBE 201 Operating Instructions Manual page 153

10 - Abs. value fixed frequency (FF)
11 - Abs. value MFI1A + FF
12 - Abs. Value EM-S1INA + FF
14 - Abs. Value MFI1A + EM-S1INA+FF
20 - Abs. value Motorpoti (MP)
21 - Abs. value MFI1A + MP
22 - Abs. Value EM-S1INA + MP
Abs. Value MFI1A + EM-S1INA +
24 -
MP 1)
30 - Abs.Val. Speed Sensor 1 (F1)
31 - Abs. value MFI1A + F1
32 - Abs. Val. Rep. Freq./PWM Inp. (F3)
33 - Abs. value MFI1A + F3
34 - Abs.Val. Speed Sensor 2 (F2)
35 - Abs. value MFI1A + F2
40 - Abs. value Motorpoti (KP)
41 - Abs. value MFI1A + KP
42 - Abs. Value EM-S1INA + KP
Abs. Value MFI1A + EM-S1INA +
44 -
KP 1)
Abs. value MFI1A + FF + KP + F3 +
80 -
1)
(EM-S1INA)
Abs. value MFI1A + FF + KP + F1 +
81 -
1)
F3 + (EM-S1INA)
Abs. value MFI1A + FF + KP + F3
82 -
2)
+ (F2) + (EM-S1INA)
Abs. value MFI1A + FF + KP + F1 +
89 -
2)
F3 + (F2) + (EM-S1INA)
Abs. value MFI1A + FF + MP + F3
90 -
1)
+ (EM-S1INA)
Abs. value MFI1A + FF + MP + F1
91 -
+ F3 + (EM-S1INA)
Abs. value MFI1A + FF + MP + F3
92 -
2)
+ (F2) + (EM-S1INA)
Abs. value MFI1A + FF + MP + F1
99 -
2)
+ F3 + (F2) + (EM-S1INA)
101 to 199
1)
The reference value source is only available if an extension module with analog input is connected. For
information, refer to the extension module operating instructions.
2)
The reference value source is only available if an extension module with speed sensor input is connected.
For information, refer to the extension module operating instructions.
12/16
Fixed frequency according to
Over 1
well as the current data set.
Combination of operation modes 10 and 1.
1) Combination of operation modes 10 and 2.
1) Combination of operation modes 10, 1 and 2.
Reference value source: Function
62 and
Up
Combination of operation modes 20 and 1.
1) Combination of operation modes 20 and 2.
Combination of operation modes 20, 1 and 2.
The frequency signals in
evaluated as a reference value.
Combination of operation modes 30 and 1.
The frequency signal on the digital input according to
Operation Mode
input.
Combination of operation modes 1 and 32.
The frequency signals of speed sensor 2 are evaluated
2)
as a reference value.
Combination of operation modes 1 and 35.
KP 500 is the reference value source, with keys ▲ for
increasing the frequency and ▼ for reducing the
frequency.
Combination of operation modes 40 and 1.
1) Combination of operation modes 40 and 2.
Combination of operation modes 40, 1 and 2.
Combination of operation modes 1, 10, 40, 32 and 2.
Combination of operation modes 1, 10, 40, 30, 32 and
1)
2.
Combination of op. modes 1, 10, 40, 32, 34
1)
Combination of op. modes 1, 10, 40, 30, 32, 34
1) 1)
2.
Combination of operation modes 1, 10, 20, 32 and 2.
Combination of operation modes 1, 10, 20, 30, 32 and
1) 1)
2.
Combination of the operation modes 1, 10, 20, 32
(+ absolute amount speed sensor 2 (F2))
1)
(+ analog input extension module).
Combination of operation modes 1, 10, 20, 30, 33, 32
1)
and 2.
Operation modes with signs (+/-).
Operating Instructions ACU
66 and
Fixed Frequency Change-Over 2
Frequency Motorpot. Down
Operation Mode
496 for the PWM/repetition frequency
1)
Fixed Frequency Change-
67 as
Frequency Motorpoti
63
490 are
2) 1)
and 2
2)
and
2)
1)
1)
1)
2)
153