Timer - Time Constant - BONFIGLIOLI ACTIVE CUBE 201 Operating Instructions Manual

2 - Retrigger, Rising Edge, Sec.
AND-Connect., Rising Edge,
3 -
Sec.
11 to 13
101 to 113
201 to 213
By default, the functions are linked according to the following illustration:
73 - S4IND
7 - Aus
The sources of digital signals (z. B. 73 - S4IND) are selected with parameters
84. By default, Timer 1 is linked to digital input 4 and Timer 2 is off.
2
The timer output signal can be assigned to a frequency inverter feature or a digital output. By
default,
Data Set Change-Over 1
NOTICE
Default settings:
to Data Set Change-Over 1 without delay.
Function Parameter for
input signal
83
Timer 1
Timer 1
Timer 2 84
Timer 2
1)
For linking to frequency inverter functions
2)
For output via a digital output.
16.5.1.1 Timer – Time Constant
The logic sequence of input and output signals is to be set separately for both timer functions via
the time constants. The default parameter values result in a direct link of the input and output signal
without a delay.
Before starting the timer, select the operation mode and set the time constants in
order to avoid non-defined states.
Select operation mode for:
Operation Mode Timer 1
790
Operation Mode Timer 2
793
196
Positive signal edge starts timer (trigger), next positive signal
edge within time 1 starts the signal delay again (Retrigger), time
2 defines the signal period
Positive signal edge starts timer (trigger), if no input signal is
received within time 1 the signal delay starts again (Retrigger), if
no input signal is received within time 2, the signal period is
terminated
Operation modes 1...3, negative signal edge starts timer.
Operation modes 1...3, [in minutes].
Operation modes 1...3, [in hours].
83
Timer 1
158 - Timer 1
P.83
84
Timer 2
159 - Timer 2
P.84
70 is linked to Timer 1 and Timer 2 is not assigned.
792 = 0. Signals at digital input S4IND are forwarded
Time 2 Timer 1
Operation Time constants
mode
Operation
Time 1 Timer 1
Mode Timer 1
Time 2 Timer 1
790
Operation
Time 1 Timer 2
Mode Timer 2
Time 2 Timer 2
793
Set time constants in:
791 (signal delay)
Time 1 Timer 1
792 (signal duration)
Time 2 Timer 1
794 (signal delay)
Time 1 Timer 2
795 (signal duration)
Time 2 Timer 2
Operating Instructions ACU
Data Set Change-Over 1
No function linked
Timer 1
Output signal of function
1)
158 -
791
Timer 1
792
2)
23 -
1)
159 -
794
Timer 2
795
2) -
24
70
83 and
Timer
12/16