BONFIGLIOLI ACTIVE CUBE 201 Operating Instructions Manual page 252

No. Description
275 Controller Status
277 STO Status
278 Frequency MFO1F
In addition to the actual values shown, other actual values are available and can be
read out via field bus.
This includes, in particular, parameters
Application
hexadecimal code (and without texts). Please refer to the communication manuals.
The actual values can be read out and monitored in the VAL menu branch of the
operating unit. The parameter
selection of the actual value parameters.
In the actual value display 243, 250, the digital inputs cannot be active (permanently
"0"). This can be caused by the configuration or functions used (e.g. sensor input or
frequency input).
Input
S2IND
S4IND Track B (speed sensor 1)
S5IND Track A (speed sensor 1)
S6IND Track Z (speed sensor 1) or
MFI1 Analog input
Setting:
For speed sensor 1, check Parameter
For PWM / Rep. frequ. input, check parameter
For MFI1, check Parameter
Actual value:
Encoder 1 Frequency is shown in 217, speed in 218.
PWM/rep.frequ. input: PWM is shown in 258, frequency in 252.
252
Actual values of frequency inverter
The reference value signal is limited by the controller coded in
the controller status.
Signal status of switch-of paths STOA (digital input
S1IND/STOA) and STOB (S7IND/STOB) of safety function "STO
– Safe Torque Off").
Output signal on Multifunction output 1 in
– repetition frequency
274 where the relevant message can be read out as
Warnings
Control Level
Deactivation mechanism for actual value display
PWM / Rep. frequ. Input
PWM / Rep. frequ. Input
Operation Mode
Operation Mode
452.
Operation Mode
Operating Instructions ACU
Function
260,
Current Error
28 in the PARA menu branch defines the
490.
496.
550
Operation mode
270 and
Warnings
12/16