BONFIGLIOLI ACTIVE CUBE 201 Operating Instructions Manual page 266

Output signals
Warnings are signaled via digital signals .
169 - General Warning
11 - General warning
1)
For linking to frequency inverter functions
2)
For output via a digital output.
Meaning of code displayed by parameter
Key
A 00 00 NO WARNING
A 00 01 BELT
A 00 02 SW-LIM CW
A 00 04 SW-LIM CCW
A 00 08 HW-LIM CW
A 00 10 HW-LIM CCW
A 00 20 CONT
A 00 40 Enc
A 00 80 User 1
A 01 00 User 2
Output signals
Application Warnings are signaled via digital signals .
216 -
Warning, application
26 -
1)
For linking to frequency inverter functions
2)
For output via a digital output.
266
1)
Signal when message is output in
2)
Application Warning Status
No warning present.
Warning V-Belt by
Operation Mode
Positive SW limit switch was reached (parameter
1145).
Negative SW limit switch was reached (parameter
1146).
Switch
The positive HW limit switch was reached.
The negative HW limit switch was reached.
The contouring error monitoring range set with
1105 was left.
A connected encoder with data track triggered a warning.
The signal set at digital input
The signal set at digital input
1)
Signal when message is output in
2)
Operating Instructions ACU
269.
Warnings
367:
Warning Status
581.
Pos. SW Limit Switch
Warning Threshold
1363 is active.
User Warnig 1 1
1364 is active.
User Warnig 2 1
Application Warnings
Neg. SW Limit
273.
12/16