9 Operation
9.3 Starting Typhoon FLA 7000 and Typhoon FLA 7000 Control Software
Start Typhoon FLA 7000 Control
Software
Step
1
2
3
9.4
Selecting the reading mode
Click the button that corresponds to the desired reading mode.
68
Action
Make sure that Typhoon FLA 7000 has completed the warm-up, after which
only the power lamp on the upper left panel on the front of the Typhoon FLA
7000 is lit.
Start Typhoon FLA 7000 Control Software from the Start menu, or use the
desktop shortcut.
The main window of the Typhoon FLA 7000 Control Software is displayed.
The condition is displayed in the Status area of the main window. Status
messages are as follows:
Message
Explanation
Disconnected
Cannot recognize Typhoon FLA 7000. Please check
connection and power.
Warm-up
Typhoon FLA 7000 is in self-diagnosis. Please wait.
Ready
The unit is ready to use.
Typhoon FLA 7000 User Manual 28-9607-62 AC