Cfm Port Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After click the Edit LCK button, the following window will appear:
The fields that can be configured are described below:
Parameter
State
Period
Level
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.

CFM Port Settings

This window is used to configure the CFM port state.
To view this window, click OAM > CFM > CFM Port Settings, as shown below:
the MEP sends AIS PDU. The default client MD level is MD level at which the most
immediate client layer MIPs and MEPs exist. Options to choose from are values
between 0 and 7.
Figure 10-9 CFM Extension LCK Settings (Edit) Window
Description
Tick the check box and use the drop-down menu to enable or disable the LCK function.
Tick the check box and use the drop-down menu to select the transmitting interval of
LCK PDU.
Tick the check box and use the drop-down menu to select the client level ID to which
the MEP sends LCK PDU. The default client MD level is MD level at which the most
immediate client layer MIPs and MEPs exist. Options to choose from are values
between 0 and 7.
342