Cfm Port Settings; Cfm Loopback Settings - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide

CFM Port Settings

This table is used to enable or disable the connectivity fault management function on a per port basis. CFM is
disabled on all ports by default.
To view this window, click OAM > CFM > CFM Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to implement the changes made.

CFM Loopback Settings

This window is used to configure the CFM Loopback settings on the Switch.
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
Figure 10-8 CFM Port Settings window
Description
Select the unit to configure.
Use the drop-down menus to select a port or range of ports to configure.
Use the drop-down menu to enable or disable the function.
307