Care And Maintenance - Sartorius Cubis MSU116P User Manual

Care and Maintenance

®
170 Cubis MSU User Manual
Care and Maintenance
Service
Regular servicing by a Sartorius technician will extend the service life of your bal-
ance and ensure its continued weighing accuracy. Sartorius offers its customers ser-
vice contracts with regular maintenance intervals ranging from 1 month to 2 years.
The frequency of the maintenance intervals depends on the operating conditions
and user's tolerance requirements.
Repairs
Repair work must only be carried out by trained service technicians. Repairs per-
formed by untrained persons may result in considerable hazards for the user.
3
The device must be unplugged during repair work.
Unplug the power cord from the outlet.
Repair work must only be performed b y Sartorius-trained service
technicians.
If required: Please contact your Sartorius dealer!
Cleaning the Balance
3
Ensure that no dust or liquid enters the balance weighing system.
Do not use aggressive cleaning agents (solvents or similar).
Isolate from supply voltage: Unplug the power cord from the wall outlet
and unplug any data cables connected to the balance.
t
Open the panels of the analytical draft shield completely.
t
Clean the housing and interior of the balance with a cloth lightly moistened
with a soap solution.
t
Dry all parts with a soft, dry cloth or use blotting paper to absorb dampness.
Then replace all dried parts.
t
Remove panels from the analytical draft shield and clean them with commer-
cially available glass cleaner. Dry the panels.
Then reinstall them to the balance.