The basic procedure for configuring a task is:
1. Create new task.
2. Select application.
3. Review all of the following prompts and configure your own settings as
required.
4. Perform steps 2 and 3 for additional applications if you would like to combine
multiple applications.
5. Check settings for weighing and printouts and modify as required.
6. If you are an administrator, define whether the new task can be used by all
or only by certain users.
7. Enter a name and description for the new task.
8. Save task.
Create new task
Select application
Review settings
Combine applications?
Settings for weighing
Settings for printing
Enter task name/description
Save task
Task Management
yes
no
Cubis
®
MSU User Manual
69