Sartorius Cubis MSU116P User Manual page 172

Care and Maintenance
®
172 Cubis MSU User Manual
Cleaning the Stainless Steel Weighing Pan
All stainless steel parts should be cleaned at regular intervals.
Use a damp cloth or sponge to clean stainless steel parts on the balance.
Only use conventional household cleaning agents which are suitable for stainless
steel (e.g. Stahlfix). After this, let the device dry.
For additional protection, protective oil may be applied.
Remove the stainless steel weighing pan and thoroughly clean it separately.
Only use solvents for cleaning stainless steel parts.
The stainless steel weighing pan should be cleaned simply by rubbing.
After this, rinse the equipment thoroughly until all residue is removed.
No protective oil should be applied to the stainless steel weighing pan.
Cleaning the Weighing Chamber of Balances with a readability of 1 μg
t
Carefully remove any powdered sample material from beneath the shield disk
using a small car vacuum cleaner with an mini-hose attached.
t
Use blotting paper to remove any liquid sample material.
3
Do not insert forceps or similar utensils behind the draft shield plate.
Note: The weighing system is hermetically separated from the area of the draft
shield plate. This prevents spillage or other impurities from entering.