Control Input/Output (e.g., for Remote Switch)
If you have connected a remote switch, for example, via the peripheral or optional
port, you can define its function here.
t
Configure the setting for each port.
t
Select the connected hardware device or control function.
h
During checkweighing, the control outputs have no function when set to:
– Foot switch YPE01RC
– Control inputs
t
Configure the settings for the control inputs and outputs.
Options: Off, no function / TARE key / PRINT key / Cal./Adj. key /
Zeroing / Taring
t
To save the settings, select
System Settings (Menu)
.
Save
®
Cubis
MSU User Manual
59