Second Tare Memory (Preset Tare) - Sartorius Cubis MSU116P User Manual

Second Tare Memory (Preset Tare)

Combination options:
D
®
118 Cubis MSU User Manual
Second Tare Memory (Preset Tare)
Purpose: This application is used to define the second tare value. As soon as a second tare
value is used, Net1
Options: You can either use a weight value or enter a numerical value as a second tare value.
Mass unit conversion, individual identifiers (SQmin function, DKD measurement
uncertainty)
Configuring a Task: Second Tare Memory
y No pre-settings are required for this application.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
Executing a Task: Second Tare Memory (Preset Tare)
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
You have two options for defining the second tare.
Using a Weight Value as a Second Tare
t
Place the object (container) on the balance whose weight value you want to
use as the second tare.
t
To set the weight value as a second tare, select
appears on the display for the respective net value.
Save .
Start
.
T1 .