3
2
1
Assembly
Installing the Analytical Draft Shield Labeled DA, DI, and DU
t
Carefully fit parts onto the balance as shown in the picture.
1. Shield plate
2. Pan support (not for MSU225.../MSU125... models)
3. Weighing pan
t
Slide the upper draft shield panel into the guide rails from the rear.
t
Slide the left and right draft shield panels into the guide rails from the rear.
Make sure the panels are within the upper and lower guide rails.
t
Slide the panels in until they engage.
1. Right draft shield panel
2. Left draft shield panel
y This completes the balance assembly.
Getting Started
®
Cubis
MSU User Manual
15