Density Determination - Sartorius Cubis MSU116P User Manual

Density Determination

Combination options:
Requirements:
Density at 20°C/68°F and exp. coefficient: For density determination using another liquid, enter density at 20°C and the
*Air density at 20°:
No decimal place:
1, *2, 3, or 4 decimal places:
®
88 Cubis MSU User Manual
Density Determination
Purpose: You can determine the density and volume of liquid, solid, or pasty materials.
Checkweighing, statistics, second tare, or individual identifiers
You require the Sartorius YDK01MS density determination kit or your own
customer-specific set. The basic calculations for density determination are described
at the end of this section.
Features * = Factory setting
Liquid
*Water: For density determination using water; the density for the corresponding
temperature is calculated automatically
Ethanol: For density determination using ethanol; the density for the corresponding
temperature is calculated automatically
User input: For density determination using another liquid, enter liquid and its density for
corresponding temperature
co efficients of expansion; the density for the corresponding temperature is calcu-
lated automatically.
Air Density
For measurement under standard laboratory conditions
User input: For measurement under other conditions, enter air density
Decimal Places
The measurement value is displayed without decimal places.
The measurement value is displayed with the selected number of decimal places.
You can choose from four methods for density determination:
– Determine density of liquid (with glass plummet)
– Determine density via buoyancy with Sartorius YDK01MS density determination
kit (for solid samples)
– Determine density via displacement (for solid samples)
– Determine density via pycnometer (for liquid, pasty, and powder samples)