Power Connection - Sartorius Cubis MSU116P User Manual

Getting Started
°C
®
24 Cubis MSU User Manual
Acclimatization
Condensation from humidity can form on the surfaces of a cold device when it is
brought into a substantially warmer area.
Allow the device to acclimatize for about two hours at room temperature, leaving it
unplugged from the power supply.
Carefully read all warnings and safety precautions in the respective section of this
manual.

Power Connection

t
Check the voltage rating and plug design.
– Make sure that the voltage rating printed on the manufacturer's ID label is
identical to that of your local mains voltage.
– If the stated supply voltage or the plug design of the power cord does not
comply with your country's standard, please inform the nearest Sartorius
representative or your dealer.
– The power must be connected in accordance with the regulations applicable in
your country.
– In order to connect the equipment to the power supply (protection class 1),
use a suitable, correctly installed wall outlet with a protective grounding
conductor (PE) and a fuse of a maximum of 16A.
– Only use original Sartorius AC adapters.
Analytical and precision balances:
1. Plug the DC supply cable of the AC adapter into the power socket of the
balance and tighten the threaded fitting.
1