Advertisement
Quick Links
Quick Start Guide
Midi Plus Electronic Pipetting Controller
Getting Started
1. Midi Plus is delivered with the battery inserted. The battery poles are covered by a
plastic protective film. Before first use, remove the plastic film by pulling it gently from
below the battery cover.
2. Charge Midi Plus for at least 4 hours before first use.
- To charge with AC-adaptor: connect Midi Plus to the charger cable and plug the
charger into the mains power outlet.
3. The battery status is indicated by a LED. When the battery is fully charged the LED
emits a green light, and the Midi Plus is ready for use.
Midi Plus is equipped with an adapter set (nose-cone and silicone adapter) that fits all
commonly used serological or volumetric pipettes.
Advertisement
Related Manuals for Sartorius Midi Plus
Summary of Contents for Sartorius Midi Plus
- Page 1 Midi Plus Electronic Pipetting Controller Getting Started 1. Midi Plus is delivered with the battery inserted. The battery poles are covered by a plastic protective film. Before first use, remove the plastic film by pulling it gently from below the battery cover.
- Page 2 Features 1. Nose-cone, silicone adapter and hydrophobic filter 2. Locking button 3. Operating buttons a. Aspiration b. Dispensing 4. Handle cover release buttons 5. Fold-out stand 6. Speed adjustment wheel 7. LED battery indicator Operation 1. Make sure the hydrophobic filter is inserted 2.
- Page 3 - Pipetting is possible while connected to the AC-adaptor. 3. Midi Plus can be used with Sartorius Optifit 5 ml and 10 ml tips. Adapters for the 5 ml and 10 ml Optifit Tips are available as accessories.
- Page 4 NOTE! Only use the power supply provided with the Midi Plus. This Quick Start Guide is for the basic operation of the Midi Plus pipette controller. For further information and more detailed instructions, please see the user manual at www.sartorius.com.