Sartorius Cubis MSU116P User Manual page 102

Averaging
®
102 Cubis MSU User Manual
t
Define whether or not the weighing results should be calculated with an
additional factor and how this factor should be applied.
No factor
You must now enter this factor.
Enter fixed factor:
Factor can be changed during process
you execute the task.
Example: Each animal should receive a food supplement of 50 mg per kg of body
weight. For this, the factor 0.05 can be entered (weight value in g/1000 g + 0.05 g).
During the measurement, both the weight value (animal weight, e.g., 285 g) as well
as the calculated value (amount of supplement, e.g., 14.25 mg) can be displayed.
If you chose to conduct the calculation:
t
Define the number of decimal places to be used for the calculation.
none, 1, *2, ... 6 digits
t
Define whether or not the end of the measurement (and if necessary the
calculation) should have an acoustic signal.
*Result beep, off or Result beep, on
y An overview of all settings is displayed.
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
: You must enter this factor when
Save .