Sartorius Cubis MSU116P User Manual page 147

Configuration Options for Printer Output Operating Mode
You can modify all settings for this operating mode depending on the configured
printer type.
– Printer type: YDP10-0CE
YDP04IS-0CEUV
– Selected protocol: Hardware handshake
– Baud rate: 300 to 19200 baud (*9600)
– Data bits: 7 or *8
– Parity: None / * Odd / Even
– Stop bits: *1 or 2 stop bits
– Log data: * Turn off /
The following setting options are available for the printer types:
– YDP10-0CE : No setting option; all parameters are permanently defined
– YDP20-0CE : All can be configured except stop bits
– YDP03-0CE : All can be configured except data bits and stop bits
– : All can be configured
Universal
– : No setting option; all parameters are permanently defined
YDP04IS-0CEUV
– YDP10BT-0CE (for optional Bluetooth module only, Com C): No setting
option; all parameters are permanently defined
Configuration Options for SICS Operating Mode
You can change all settings for this operating mode.
– Selected protocol:
No protocol
*
Hardware handshake RTS; CTS
– Baud rate: 300 to 115200 Baud
– Data bits: 7 or * 8
– Parity: None / * Odd / Even
– Stop bits: * 1 or 2 stop bits
– Log data: * /
Turn off Turn on
/ YDP20-0CE / YDP03-0CE
Turn on
/
Software handshake XON; XOFF
, *9600
Cubis
Interfaces
/ Universal /
/
®
MSU User Manual 147