Sartorius Cubis MSU116P User Manual page 35

2
3
2. Push the cover of the below-balance weighing port to one side.
3. Carefully screw on the hook for below-balance weighing.
3
Do not screw it in too tightly,
as this could damage the thread or the balance.
h
Install a draft protection shield.
t
Attach the sample (e.g., using a suspension wire) to the hook.
4. When the below-balance weighing has been completed, unscrew the hook and
return it to the clip under the balance.
Balances with a Weighing Range of 20 kg or more:
t
Use a suitable screwdriver to unscrew the cover plate from the bottom of the
mass comparator.
t
Request the hook directly from Sartorius.
h
Install a draft protection shield.
Uninstalling Below-balance Weighing Equipment
t
After uninstalling the below-balance weighing equipment, you must close the
opening again with the cover.
Getting Started
®
Cubis MSU User Manual 35