Sartorius Cubis MSU116P User Manual page 60

System Settings (Menu)
®
60 Cubis MSU User Manual
Configuring "Print to file"
Purpose:
– Transferring a print file in TXT or CSV format to a SD card or FTP server.
– Viewing a print file directly in an Internet Browser.
t
Select Off .
t
Specify the file format.
Print to CSV file:
In addition to the SBI output (like in the TXT file), three additional columns are also
written to the file: ID, Value and Unit.
The 4 columns are separated by the ";" character. The "+" sign has also been removed
in the third column and the decimal point has been replaced by a decimal comma
(because of Excel).
t
To specify the settings for the automatic or manual data transfer, touch
y The data are deleted from the balance after the automatic or manual transfer
so that only the new data are transmitted the next time there is an automatic
transfer.
y Manual transfer:
Touch or
Trans.SD Trans.FTP
the balance or to the FTP server.
y The transfer takes place in the data/print directory.
t
Select the output medium for the file.
y This file can be transferred manually or automatically to the SD card of the FTP
server. Combinations are also possible, e.g. manual transfer to the SD card and
automatic transfer to the FTP server.
"To SD card":
y When exporting, print files can also be exported to the SD card independent of
the transfer. This will create a copy (backup) of the file to the SD card. This does
not delete the file from the balance. After the export, the files are located in the
directory data/all/EXPORT-xxxx/print.
during operation to transfer data to the SD card in
.
Off