Sartorius Cubis MSU116P User Manual page 113

t
Specify whether or not there should be an automatic restart after
the timer-controlled function has been triggered.
*Off , no restart
On (restart automatically):
timer-controlled function has been carried out.
y An overview of all settings is displayed.
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
Executing a Task: Timer-controlled Functions
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
If required, enter the time or interval
(hh:mm:ss, e. g., 00:00:30 for an interval of 30 seconds).
t
Follow the instructions on the display.
Timer-controlled Functions
The timer is restarted as soon as the
Save .
Start .
®
Cubis MSU User Manual 113