Accessories - Sartorius Cubis MSU116P User Manual

Accessories

®
Cubis Optional Accessories
Printers and Communication
Verifiable data printer for connection to RS-232, 25-pin accessory interface
Verifiable data printer with Bluetooth
Color ribbon for YDP10-0CE and YDP10BT-OCE
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each
Bluetooth ®
data interface for wireless connection of data printer YDP10BT
RS232C data interface, 9-pin including PS/2 for connecting a PC or keyboard
RS232C data interface, 25-pin for connection of Cubis
®
Display cable 3 m for Cubis MSA and MSU models, for separate setup of display and weighing unit
(Installation by Sartorius Service or in factory [order VF4016])
Cable 3 m between weighing module and electronics module for Cubis
with 0.01 mg | 0.001 mg | 0.0001 mg readability
Installation display cable 3 m for Cubis
RS232C connection cable to connect PC with 9-pin COM interface, length 1.5 m
Sartowedge software for data communication between balance and PC
Sartorius OPC Server for connecting all Sartorius Cubis
Requires 32-bit Microsoft Windows 2000 or XP with current service packs.
(free download of a 30-day trial version from the Sartorius website)
– Initial license
– Each additional license within an order
Displays and Input | Output Elements
MSA control unit with color TFT graphic display and touch screen
MSE display unit with backlit LC display and tactile keys
MSU control unit with backlit b | w graphic display and tactile navigation keys
Barcode reader with connection cable, 120 mm reading range
Foot switch for printing, taring, or using function keys, selection via menu, incl. T connector
Infrared sensor for touch-free activation of functions (e.g., draft shield control)
Hand switch for printing, taring, or using function keys, selection via menu, incl. T connector
Foot switch for the draft shield OPEN | CLOSED functions (only in combination with DA and DI draft shield),
taring and printing
Additional display, LCD, figure size 13 mm, backlit
3-segment control display, red – green – red, for plus | minus measurements, incl. T connector
®
data transmission (with YDO01MS-B or IB option only)
®
accessories
®
models, for separate setup of display and weighing unit
®
balances
®
models
Balance Dimensions
YDP10-0CE
YDP10BT-0CE
6906918
6906937
YDO01MS-B
YDO01MS-P
YDO01MS-R
YCC01-MSD3
YCC01-MSM3
VF4016
7357314
YSW02
6289OPC
6289OPC-L
YAC01MSA
YAC01MSE
YAC01MSU
YBR03PS2
YFS01
YHS01MS
YHS02
YPE01RC
YRD03Z
YRD11Z
®
Cubis MSU User Manual 205