Sartorius Cubis MSU116P User Manual page 72

Task Management
®
72 Cubis MSU User Manual
Configuring Printouts in the System Settings (Menu).
h
The settings can only be modified as long as no task has been activated (ready to
start) in the operating mode. Make sure that basic weighing is active in the operat-
ing mode.
t
Toggle to the System Settings menu.
t
Open the Configure data output
If the submenu is not selectable, check the operating mode and select basic weighing.
y
The setting menu will open. Several options are not modifiable because they
are preset by the interface configuration.
The initial default setting and several examples of settings are described in the
following.
submenu.