Safety Instructions - Sartorius Cubis MSU116P User Manual

Safety Instructions

1
2
2
2
2
2
®
4 Cubis MSU User Manual
Safety Instructions
This device complies with European Council Directives as well as international regulations
and standards for electrical equipment, electromagnetic compatibility, and the stipulated
safety requirements. Improper use or handling can, however, result in damage and/or injury.
This device should only be operated by trained personnel.
Operators must read these installation instructions, particularly the safety information, and
must be familiar with the operation of the equipment. The operator is required to supple-
ment these safety precautions as appropriate. The operating personnel must be provided
with the appropriate training.
The requirements pertaining to applicable installation regulations must be followed when
using electrical equipment in systems and environmental conditions with increased safety
requirements. Relevant laws, standards, regulations, guidelines and environmental protec-
tion laws valid in your country must be observed.
Always keep the equipment and balance freely accessible. Any installation work or balance
operation that does not conform to the instructions will result in forfeiture of all claims
under the manufacturer's warranty.
Danger of Explosion!
Do not use this equipment in hazardous areas in which explosive materials are present.
Danger of Electrical Shock!
If the device is not used in accordance with the instructions, this can affect the product lia-
bility for the device.
Make sure that the voltage rating printed on the AC adapter is identical to your local
line voltage. The wall outlet must have a protective grounding conductor. The operating
instructions included with the AC adapter must be followed.
Do not switch on the equipment if the AC adapter or power cord are damaged.
If the balance itself, the AC adapter or any cables on the balance are damaged, disconnect
the equipment from the power supply and secure it so that it cannot be turned on.
Chemicals (e.g. gases or liquids) that can corrode and damage the inside or outside of the
balance, AC adapter, power cable or peripherals must be kept away from the equipment.
Do not operate the balance unless the housing and the display are undamaged and the
housing is closed so that inadvertent contact with parts inside the equipment is not pos-
sible. Make sure that no liquids penetrate the balance and do not allow conductive parts to
touch the balance.
Note on Installation:
The operator shall be solely responsible for any modifications to the equipment and for
connecting any cables or equipment not supplied by Sartorius.
Information on operational quality is available upon request from Sartorius.
You should only use peripherals and options supplied by Sartorius.