Sartorius Cubis MSU116P User Manual page 164

Interfaces
®
164 Cubis MSU User Manual
SICS and Mini-SICS Commands
The computer connected via the data port can send control commands to the
balance to control balance and application program functions.
h
Please consult the separate SICS documentation for a description of the syntax.
1)
Some labeled commands can also be mini-SICS commands.
Command Action/Function
Level 0 Version 2.3x
@ Reset all SICS commands
I0
List all available commands
I1 Send information about the level and its versions
I2
Balance model prompt
I3
Prompt for input of software version of balance (BAC)
I4
Prompt for balance serial number
I5
Prompt for software version of display (APC)
S 1)
Send weight value at stability
SI 1)
Send weight value without stability
1)
SIR Send automatic weight values at and without stability
Z
Zero the balance at stability
ZI
Zero the balance without stability
Level 1 Version 2.2x
T 1)
Tare the balance at stability
TI 1)
Tare the balance without stability
D
Write text in display
DW
Delete text from display
K
Key control
TA Prompt for and allocate tare memory
TAC
Delete tare memory
SR
Send weight value if weight changes
Level 2
SU
Send weight value at stability with current weight unit (with motorized draft shield)
WS
Query door position of motorized draft shield / Open or close door
PWR
Turn balance on/off (standby)
I10
Query/set the balance ID
I11
Query balance type
I14
Query balance components
M01 Query/set application filter
M02
Query/set filter adjustment
M03
Query/set automatic zeroing
M04
Query/set I/O inputs
M07
Query/activate/deactivate automatic draft shield
M12
Acoustic signal (beep)
M13 Activate/deactivate touch screen softkeys
M21
Query/set unit of weight
M24
Query/deactivate "Print" key / Print the stable or unstable weight values
M39
Query/activate bar graph display in working environment
P100
Send text line to printer
C1
Execute calibration/adjustment (as set in menu)