Rfid; Care And Maintenance; Cleaning And Maintenance - Sartorius Picus User Manual

5. The display asks you to enter the new password.
a. Enter the password one number at the time by using the adjustment
wheel and by accepting the number by pressing the right Softkey for
OK or the operating button. Repeat this until you have inserted all 4
numbers.
OR
b. Press the left Softkey for BACK at any time to exit the screen without
saving any changes.
6. When you have accepted the last number, the password has been changed
and "New password set!" text is displayed on the screen after which you
are returned to the Password display.
7. Exit the Password display by pressing the left Softkey for BACK.
8. Once you are back in the Setup menu, press the left Softkey for BACK two
times to return to the main display.

3.5. RFID

Picus® NxT is RFID enabled to support asset management. To recall the
information stored on the RFID chip, the reader and the software for RFID
type HTS2048 are required.
On delivery, the RFID chip in the Picus® NxT contains the following
information:
- Product code
- Serial number
- Calibration certificate number
- Calibration date

4. Care and Maintenance

Any precision instrument, such as a pipette, comprises of a great variety of
mechanical and electronic parts that are subject to wear and tear. By taking
care of the pipette and carrying out regular maintenance and calibration the
functionality and performance of the pipette can be ensured.
To avoid contamination of the pipette and the sample and to extend the
pipette's lifetime, Sartorius Safe-Cone Filters (available for pipettes >10 µl) or
Sartorius SafetySpace Filter Tips should be used.
Sartorius provides service, maintenance and calibration services through its
global network of service centres. Please contact your nearest service centre
for assistance.
NOTE! Please note that the warranty will be voided in the event that the
pipette is disassembled or assembled by an unauthorised person.

4.1 Cleaning and Maintenance

Sartorius electronic pipettes can be cleaned and decontaminated by using
disinfectant or decontaminant liquids such as 70% ethanol, 60% isopropanol,
mild detergent or similar.
Always check the chemical compatibility between the materials of the pipette
and the disinfectant or decontaminant liquid.
−Turn off the pipette prior to cleaning.
−It is recommended to always use gloves when cleaning the pipette.
−Change the Safe-Cone Filter regularly with the tweezers provided with the
pipette.
−Cleaning is always recommended after possible contamination or dispensing
corrosive or other aggressive chemicals.
−Never let liquids enter the inner parts of the pipette.
25