Averaging - Sartorius Cubis MSU116P User Manual

Averaging

Combination options:
D
®
100 Cubis MSU User Manual
Averaging
Purpose: This application is used for moving samples (e. g., live animals) and for weighing
in unstable environments. A measurement cycle is automatically carried out with
a defined number of measurements for each object to be weighed. The individual
measurements are averaged, and this average is displayed as the result.
For balances used in legal metrology, follow the directions in Section "Executing
Tasks."
Options: You can start the measurement manually or it can start automatically as soon as
the min. weight is reached. Depending on how strong the unsteadiness of the
sample is, you can vary the sensitivity for the measurement. The number of
measurements from which the average is taken can also be defined.
Checkweighing, timer-controlled functions, totalizing, statistics, formulation,
SQmin function, DKD measurement uncertainty, second tare, individual identifiers
Configuring a Task: Averaging
t
Select how the application should start.
Start by pressing
*Automatic start:
min. load is exceeded.
t
Define the min. load for the automatic start of the averaging and/or for
the release of the result display for the manual start.
none, 10, 20, 50, *100, ...1000 digits
The number of digits depends on the balance resolution (see Display).
Example: For a balance with a resolution of d = 0.1 (100 mg), 100 digits means
a min. load of 100 + 0.1 = 10 g. With this setting, the automatic start would
be triggered as soon as a min. of 10 g was placed on the balance.
Automatic start only:
t
Determine the weighing mode: *
This starts the application manually.
key:
The application starts as soon as a pre-defined
Weighing in
or
Final readout