Updating The Software - Sartorius Cubis MSU116P User Manual

Updating the Software

®
166 Cubis MSU User Manual
Updating the Software
Purpose: To better serve our customers, Sartorius constantly improves its balance software.
Sartorius makes the latest software versions available online so that you can quickly
and easily remain up-to-date. Sartorius, however, makes no guarantee regarding
the use of this software.
The software should only be updated by an administrator.
On verified balances, observe the Audit Trail instructions under
(3) Upload the Software Update to the Balance.
3
Before updating the software, save all data (see Section Exporting Data).
h
If you are working with User Management (user profiles are defined), the software
can only be updated by the administrator.
1) Download the Software Update from the Internet
The first step is to download the software to your computer:
t
In your browser, go to
"www.sartorius.com/downloads" and click on the "Software" link.
t
Select the update package for your balance.
t
Enter the information required for registration.
t
Download the software package to your computer.
t
Unzip the file.
t
Copy the software update to an SD card (32 + 24 + 2.1 mm).
2) Insert the Memory Card into the Control Unit
The slot for the SD card is located at the back of the control unit.
1
1. Tilt the display and control unit.
2. Swivel the cover of the card slot to the front.
Align the SD card so that the contacts are facing forward.
3. Insert the card into the slot as far as it will go.
t
To remove the card, press it down into the slot so that the card springs out.
2