Sartorius Cubis MSU116P User Manual page 126

Checkweighing
®
126 Cubis MSU User Manual
Executing a Task: Checkweighing
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
Define check values by entry:
t
Select the input field Setp and enter the target.
t
Select the input field Min or Max and enter the minimum or maximum check
values.
or
Define check values with current load:
t
Place the weight on the weighing pan.
t
Select
More.
t
Select the field of the check value with the current weight value you want
to use.
t
If required, repeat the process with additional weights for the other check
values.
t
To exit the input mode without saving the value, select
t To start checkweighing, select
y The entered check values are displayed graphically.
t
Place the object to be checked on the weighing pan.
Start .
Back
Start.
.