Sartorius Cubis MSU116P User Manual page 123

Executing a Task: Parts Counting by Entering the Piece Weight
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
y The last used piece weight wRef is displayed.
t
Use the cursor softkeys to select the input field for the piece weight.
t
Enter the piece weight of the reference object (e. g., 50 g).
y The reference piece quantity and the entered piece weight are displayed.
t
Place the sample with the objects to be counted on the weighing pan.
y The calculated piece count is displayed.
t
To display the weight of this sample, select
y The weight of the sample is displayed.
t
To toggle between the display of weight value and piece count, select
or Weigh .
t
To count the next quantity of objects, empty the weighing pan and place
the next sample onto it.
y The weighing result is updated immediately.
t
To display the piece count of this sample, select
Parts Counting
Start .
Weigh .
Count
Count .
®
Cubis MSU User Manual 123