Sartorius Cubis MSU116P User Manual page 103

Executing a Task: Averaging with Manual Start
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
If you are using a variable number of measurements, enter the desired number.
t
If you are weighing live animals, place the container (cage) on the weighing
pan and tare the balance.
t
Place the animal in the container.
t
To begin weighing, select
y The defined number of measurements is carried out and the average
is displayed.
t
To start the calculation, select
y The results calculated with the entered factor are displayed.
t
To display the average weight value, select
t
To view the calculated value on the display again, select
Start .
.
Start
Start .
Result .
Cubis
Averaging
Calc.
®
MSU User Manual 103