Sartorius Cubis MSU116P User Manual page 101

t Enter the range of instability for the start of the measurement:
0.1%, 0.2%, 0.5% ... *10% ... 50% from measured object
This entry estimates the strength of the instability that is caused by the activity
(e. g., animal movement). You can use the rough estimation or a more detailed
estimation using percentages.
The weight value changes with each movement of the weighing pan. As soon
as three consecutive measurement values are within the selected instability range,
the interval measurement begins.
Example: You are weighing animals with an average weight of approx. 300 g.
With the "5.0% of object" setting, the measurement starts when the movements
are within a range of 15 g, i.e., ± 7.5 g. With the "50% of object" setting, the
interval measurement would start when the weight value was within a range
of 150 g, i.e. ± 75 g.
Measurement at 50% ±75 g
400
350
300
250
200
150
100
50
0
Start at minimum load 100 digits
t Define the number of measurements to be used for the average value.
Enter fixed number : You must now enter a fixed number.
*Number can be changed during process
you execute the task.
Activity
Measurement at 5% ±7.5 g
Time
: You will define the number when
Cubis ® MSU User Manual
Averaging
101