Sartorius Cubis MSU116P User Manual page 107

t
Once you configure the components, define the unit:
*Amount in weight unit
Default in percent, sum = 100%
Default in percent, sum <> 100%
t
Select .
Next
t
Enter the number of components.
y An overview of all settings is displayed (here, Formulation 2 as an example).
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
Executing a Task: Formulation
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
If required, enter the number of components that you want to weigh while
adding them.
t
To start the formulation, select
t
If required, enter the name of components.
Please note that you will be able to scroll through the lines with the cursor softkeys
as soon as a scroll bar appears to the right of the display.
(Formulation 1)
(Formulations 2 and 3)
(Formulations 4 and 5)
Save .
Start .
.
Start
®
Cubis MSU User Manual
Formulation
107