Sartorius Cubis MSU116P User Manual page 43

Entering Text and Numbers
A keyboard will appear whenever you have to enter text and numbers.
A cursor appears in the entry line above the keyboard.
t
Select the character you would like to insert using the cursor softkeys.
t
To accept the character, confirm with
y The character will appear in the entry line.
Press the shift softkey to switch the input mode between uppercase letters,
lowercase letters, numbers, and a complete set of special characters.
Press Add to confirm the selected character and add it to the text line.
The backspace key is used to delete the character to the left of the cursor.
The two arrow keys move the cursor one character to the left or right.
Press OK to exit input mode and save your entry.
Press Back to cancel input mode and go back one program step to the previous
screen.
Opening and closing the rotation draft shield (models MSU6.6S/3.6P/2.7S):
Defining the opening width:
t
Touch DraftShld
yThe settings for the opening angle are displayed.
t
Check the settings and change as required.
O
Draft shield opens according to the opening angle setting.
Add .
.
Using the Balance
®
Cubis MSU User Manual 43