Data Output - Sartorius Cubis MSU116P User Manual

Interfaces
Data Output by Print Command
Automatic Data Output
Example: Output Without an ID Code
Example: Output Without an ID Code
®
156 Cubis MSU User Manual

Data Output

You can define the data output parameter so that output is activated either when
a print command is received or automatically synchronized with the display
or at defined intervals (see application programs and autoprint settings).
The print command can be transmitted by pressing P or by a software com-
mand (Esc P).
In autoprint mode, data is output to the data interface port without an extra print
command. You can have synchronized data output automatically at defined display
update intervals, with or without the stability parameter. The interval time depends
on the balance operating status and balance type. For Autoprint for the fasted
display result, set additional software handshake or no handshake.
If the automatic data output is activated in the Device Configuration, it starts
immediately after the balance is turned on. You can also configure whether
the automatic data output can be stopped and started by pressing the P key.
Output rate The max. output rate of the data interfaces depends on the selected menu settings.
Data Output Formats
You can output the value displayed in the measured value line and the weight unit,
with or without a data ID code. Configure this output parameter in the Device
Parameters menu (Menu > Device parameters > Configure data output > Line
format).
+ 253 pcs
Qnt +
Data Output Format with 16 Characters
Display segments that are not activated are printed as spaces.
Display values without a decimal point are printed without a decimal point.
The type of character that can be printed depends on the character's position.
Normal Operation
Position 1
8 characters +
9 characters +
or –
or
*: Spaces
A: Displayed characters
E: Symbol for the unit, or "!"
as a warning symbol for
calculated values
16 characters are printed
253 pcs
22 characters are printed
2 3 4 5 6 7 8
A A A A A A A
A A A A A A A
. . . . . . .
* * * * * * *
CR: Carriage return
LF: Line feed
9 10 11 12 13 14 15 16
A A * E E E CR LF
A A A E E E CR LF
. . . * * *
* * *