Sartorius Cubis MSU116P User Manual page 94

Statistics
®
94 Cubis MSU User Manual
t
Define when the number of measurements (items) will be set.
Enter fixed quantity
Quantity can be changed during the process
when you execute the task.
t
Define whether or not automatic taring should take place after storing the
value.
y An overview of all settings is displayed.
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
y The new task is saved with your settings and displayed in the task list.
Executing a Task: Statistics
D
t
If you haven't already done so, go to Task Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already selected, press
y The program switches to operating mode.
t
If required, enter the number of items that you want to analyze.
t
Place the first sample on the weighing pan.
t
To start Statistics, select Start.
y The first weight value is displayed.
: The item number is defined beforehand.
.
Save
Start
: Enter the item number
.