Individual Identifiers - Sartorius Cubis MSU116P User Manual

Individual Identifiers

Purpose: You can define identifiers for the following print jobs:
–
–
–
–
–
–
–
These identifiers are also printed in the log ("protocol").
Combination options: Second tare (SQmin function, DKD measurement uncertainty)
Example: You want to configure the application as follows:
–
–
–
Configuring a Task: Individual Identifiers
D
t
Print output
Task start, task exit
y The corresponding ID (P-ID1, T-ID1, T-ID2, etc.) will be displayed for each
t
Printout by pressing PRINT
Starting a task
End of task
Initialization (for calculating applications only)
Result (for calculating applications only)
Component (for logging applications only)
Evaluation (for logging applications only)
You want the printout to be activated with the PRINT key.
You want to configure the application so that four identifiers are included
in the printed log: your company address in three lines and the batch number
in one line.
The batch number is to be counted up automatically.
Enter the desired number of individual IDs that you want to set up.
: Identifier for the Print p key
: Number of identifiers for task start or task end.
identifier.
Enter the desired title for each ID.
Individual Identifiers
®
Cubis MSU User Manual 85