Sartorius Cubis MSU116P User Manual page 32

Getting Started
®
32 Cubis MSU User Manual
Semi-microbalances: Attaching the Display and Control Unit to the Electronics
Module (MSU225..., MSU125... models)
The display and control unit can also be attached to the electronics module if
required for operation.
t
Turn over the balance and place it on a soft surface.
Remove the connection cable from the cable channel:
t
Remove two screws from beneath the weigh cell and detach the plate.
t
Remove the connection cable plug.
t
Then reattach the plate to the slot.
t
Remove the display and control unit from the weigh cell:
Remove two retaining screws.
t
Remove the display and control unit.