Interfaces
®
150
Cubis
MSU User Manual
Establishing a Radio Connection with the Bluetooth Printer
t
Make sure that the printer to which you wish to connect is ready to operate.
t
Select the
Sartorius BT printer
t
To establish the connection, select
y The balance will now search for the Bluetooth device. This process may take
time. Wait for the next message to appear on the display.
y A message will appear to confirm whether the printer has been found.
t
To save the settings, select
y The connection will initially be terminated after saving.
The LED on the printer will continue to flash blue/red.
y As soon as the configuration menu is exited, the connection will
be re-established. The LED on the printer will then illuminate permanently
(blue).
as the device.
.
Scan
Save
.