Sartorius Cubis MSU116P User Manual page 121

t
Define the accuracy to be used for the weight value.
*Normal resolution
10-fold (+ 1 dec. place):
100-fold (+2 dec. places):
Only with calculation of reference piece weight:
t
Define whether or not the piece weight should be updated when counting.
Optimization off
*By pressing key, after prompt
Automatic updating
y An overview of all settings is displayed.
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
Executing a Task:
Parts Counting with Reference Piece Weight Calculation
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
y The last used reference piece quantity
t
If you are working with a variable reference piece quantity, you must enter
or change this now.
t
Place this exact amount (nRef) of the objects to be counted on the
weighing pan.
: As displayed
With one decimal place more than on the display
With two decimal places more than on the display
Save .
Start
is displayed.
nRef
Parts Counting
.
®
Cubis MSU User Manual 121