Calibration/Adjustment Data - Sartorius Cubis MSU116P User Manual

Configuring Calibration/Adjustment
Settings are divided into the following submenus:
– Define calibration/adjustment functions
– Define external calibration weights
– Set fully autom. adjustment function isoCAL
t Configure the settings for all submenus.
t
To save the settings, select
h
Factory settings are marked with an asterisk (*).
Defining Calibration/Adjustment Functions
Cal./adj. key : Function: Block key / *Configure key selection menu / Select
fixed 1-key function
Cal./adj. selection menu
are listed when the Cal./adj. key is touched.
Cal./adj. sequence
then adjust manually
: Options: *Gram / Kilogram / Defined via data record
Cal./adj. unit
Defining External Calibration Weights
No. of ext. cal. weights
Ext. cal. weight n
(in grams), ID, certificate, validation
Configuring Fully Automatic Adjustment Function isoCAL
: Define the function setting: Off / Show alert levels, manual start /
isoCAL
*On, automatic execution
isoCAL alert level
Error message, adjustment required
isoCAL temperature
isoCAL interval time
.
Save
: Select which calibration/adjustment functions
: Options: *Calibrate, then adjust automatically / Calibrate,
: Enter the number.
: Enter the data for each calibration weight: weight value
: *isoCAL status field only / Alert message, repeating /
: Enter temperature difference (in Kelvin).
: Enter interval time in hours.
System Settings (Menu)
®
Cubis MSU User Manual 47