2
1
1
2
3
2
1
1
t
Slide the upper draft shield panel into the guide rails from the rear while
pressing the locking tab.
t
Slide the side draft shield panel into the guide rails from the rear while pressing
the locking tab.
y This completes the balance assembly.
t
If necessary, remove the panel again:
1. Press on the locking tab
2. Remove the panel
t
Place the panel in the storage slot at the back of the balance.
Assembling Precision Balances without a Draft Shield with a Weighing Range of
up to 15 kg
t
Carefully insert all parts.
1. Pan support
2. Shield plate/Draft shield
3. Weighing pan
t
Place the pan support (1) diagonally and press down lightly.
Getting Started
®
Cubis
MSU User Manual
17