4
5
6
1
Models with the Analytical Draft Shield:
t
Remove all items (such as weights, sensors, etc.) from the weighing chamber.
1) Remove one side draft shield panel
2) Remove the other side draft shield panel
3) Remove the upper draft shield panel
4) Remove the weighing pan
5) Remove the pan support (not for MSU225.../MSU125... models)
3
6) Remove the shield plate/draft shield
2
t
On models without a draft shield: press down on the two pan support
fasteners.
t
Rotate and remove the pan support.
t
Place the balance in the lower part of the packaging.
Storage and Shipping
®
Cubis
MSU User Manual
177