Sartorius Cubis MSU116P User Manual page 162

Interfaces
Overview of SBI Commands
Format Command Action/Function
1 ESC P Print to the interface where the prompt originated
1 ESC T "TARE" key taring and zeroing
1 ESC K Filter "Very stable conditions"
1 ESC L Filter "Stable conditions"
1 ESC M Filter "Unstable conditions"
1 ESC N Filter "Very unstable conditions"
1 ESC O Block keys
1 ESC Q Acoustic signal
1 ESC R Unblock keys
1 ESC S Restart
1 ESC Z Internal calibration/adjustment
1 ESC U Tare
1 ESC V Zero key
1 ESC W Ext. Adjustment with default weight
2 ESC f3_ Zero
2 ESC f4_ Tare (without zeroing)
2 ESC f5_ Left draft shield key (closing and opening as learned or default)
2 ESC f6_ Right draft shield key (closing and opening as learned or default)
2 ESC kF1_ Softkey 1, first from right
2 ESC kF2_ Softkey 2, second from right
2 ESC kF3_ Softkey 3, third from right
2 ESC kF4_ Softkey 4, fourth from right
2 ESC kF5_ Softkey 5, fifth from right
2 ESC kF7_ "Menu" softkey
2 ESC kF9_ "TASK" key
2 ESC kF10_ "USER" key
2 ESC kP_ Print as with "PRINT" key (e.g., to several interfaces)
2 ESC m0_ Ionizer status
2 ESC m1_ Ionizer on, with preset time
2 ESC m2_ Ionizer off
2 ESC s3_ Back, exit, cancel
Models with the
analytical draft shield
2 ESC w0_ Draft shield status
2 ESC w1_ Open left door
2 ESC w2_ Close all doors
2 ESC w3_ Open upper door
2 ESC w4_ Open right door
2 ESC w5_ Open left and upper door
2 ESC w6_ Open left and right door
2 ESC w7_ Open right and upper door
2 ESC w8_ Open all doors
2 ESC x0_ Perform internal calibration
2 ESC x1_ Print weigher type
2 ESC x2_ Print serial number
2 ESC x3_ Print balance software version
2 ESC x4_ Print softw. version of display and control unit
2 ESC x5_ Print user/device ID
2 ESC x6_ Print cal./adjust. weight ID
2 ESC x7_ Print batch ID
3 ESC txxx_ Input text
3 ESC txxx_ESC f5_
3 ESC txxx_ESC f6_
3 ESC z5xxx_ Entry device ID
3 ESC z6xxx_ Entry cal./adj. device ID
3 ESC z7xxx_ Entry measurement series ID
4 ESC e! {xxx}_ Execute application command, {xxx} = Task ID
4 ESC e? {Xxx}_ Query parameter, {xxx} = Parameter ID
4 ESC ea {xxx}_ Save weight value to alibi memory (with optional label), {x...x} = Memory ID
®
162 Cubis MSU User Manual
Comments
Depending on menu, 1/2 step increments
Depending on menu, 1/2 step increments
Depends on application
Depends on application
Depends on application
Depends on application
Depends on application
Only if available
Only if available
Only if available
Models with the
rotation draft shield
Draft shield status
Open draft shield 100% to the left
Close draft shield
Open draft shield to saved position
Open draft shield 100% to the right
–
–
–
Entry of opening angle xxx in degrees for left key
Entry of opening angle xxx in degrees for right key
Corresp. to menu, with/without stability
Only if available
Only if available
Analytical and rotation
draft shield
Only if available
Only if available
Only if available
Only if available
Only if available
Only if available
Only if available
Only if available
Only if available